方形保险丝格书.docVIP

产品规格承认书宏大电子限公司HONG DA ELECTRONIC TECHNOLOGY CO.,LTD客户资料CUSTOMERS INFORMATION产品名称：PRODUCTION NAME塑封方形FUSE客户：CUSTOMER： 产品型号：PRODCTION TYPE:SET机型：MODEL NO：产品规格：PRODUCT SPECIFICATIONST1A250V料号：PART NO:产品摘要：TYPE：特殊要求：SPECIAL REQUIREMENTS送样日期：DATE:承办人：ISSUEDER: 设计（DESIGN): 李雪梅 审核（CHECKED): 批准（APPROVDE): 客户确认APPROVDE BY签名： 日期：SIGN: DATE:结论（RESULT）：确认后请回传 PLEASE RETURN BY ONE COPY SET系列(慢断)保险丝规格书适用范围:本产品为慢断微型塑料保险丝，适用于各类在250V以下电压电子电器元件内的电路中起过电流保护作用The fuse is a Time-Lag micro plastic fuse , for the electronic device which rated voltageis less than AC 250V.形状，外观及尺寸如下图(单位:mm) The out view, construction and dimensions to the following figure.（Unit:mm） 序号NO.部品名Parts Name材料Material数量Quantity①可熔体Fuse Element合金线Alloy Wire1②内芯core尼龙Nylon PA661③外壳case尼龙Nylon PA661④引线Lead Wire镀锡铜线Tin plated Copper Wire23.产品标志(Marking)3.1 保险丝上的标志应易于看清。The relevant markings shall be marked on the caps of the fuse and shall be easily visible. SET SET T1A250V 3.2保险丝上必须有下列标示：The markings for every fuse shall be prescribed as below according to the types.安规认证标示（Safety Approval Logo）： 额定电流（Rated Current）：1A额定电压（Rated Voltage）：250V商标（Trademark）：特性符号（Characteristic Symbol）:T注意：本产品对标示的大小和位置没有规定Note：This product to sign the size and position of no provisions4.外观与形状(Appearance and shape) 4.1外观(Shape)外观不应有显著的污点,铁锈或裂纹且标示应很容易辨认的.Appearance should not stain, rust or cracks and marked should be easily recognizable4.2形状(Appearance)微型保险丝(Micro Fuse)5．机械特性( Mechanical Performances)保险丝应能承受下列二项试验。Fuse shall withstand the following two tests.5.1 拉力试验(Tensile Test)将保险丝保持在一个固定的位置，沿引线方向施加10N的拉力，引线、方形塑料帽不能松动并且方形塑料帽不应破裂。When fuse is fixed and the tensile force 10N is applied in a direction to lead, no looseness of leads and square thermoplastic cap or damage of square thermoplastic cap shall occur.5.2 推力试验(Thrust Test)将保险丝保持在一个固定的位置，沿引线方向旋加2N的推力，引线、方形塑料不能松动并且方形塑料不应破裂。When fuse is fixed and the thrust 2N is applied i