《毕业设计(论文)-135动力水龙头的设计》.doc

PAGE PAGE 33 135动力水龙头的设计 摘 要: 在国内外，动力水龙头是一种常见的石油钻井修井设备。与 机械转盘相比，动力水龙头具有很多优势。国外在20世纪50年代就积极开展这种水龙头的研制，近年来，随着修井机得更新换代和装备水平的提高，动力水龙头的使用范围不断扩大，在修井钻井中得到了广泛的应用，因此无论从理论还是实践以及实用性来说，研究135动力水龙头这个课题都有较大的意义，对水龙头这个系列也是一个有益的补充。动力水龙头主要由水龙头本体，减速器，液压马达等组成。 本次设计综合运用机械设计、机械制图、机械制造基础、金属材料与热处理、公差与技术测量、理论力学、材料力学、机械原理、计算机应用基础以及工艺、夹具等基础理论、工程技术和生产实践知识。按机械设计的一般程序、方法、设计规律、技术措施，并与生产实习相结合，分析和解决一般工程实际问题的能力。 关键词：石油钻井修井设备；水龙头本体；减速器；液压马达 The design of 135 power tap Abstract：At home and abroad, power tap is a common oil drilling well servicing equipment. Compared with the mechanical wheel, power taps have many advantages. 50 years abroad in the 20th century, this faucet to actively carry out research in recent years, with the workover rig and equipment have to raise the level of replacement, the use of dynamic tap growing in the workover drilling has been widely applied in Therefore, from both theory and practice, and practical, the research power tap 135 has a greater significance on the subject, the series of taps is a useful supplement. Powered mainly by the tap faucet body, gear, hydraulic motors and other components. This design is the greatest achievement: the integrated use of mechanical design, mechanical drawing, mechanical manufacturing base, the metal material and heat treatment, tolerance and technology measurement, theoretical mechanics, mechanics of materials, mechanical principles, Computer Application and process, fixture and other basic theory, engineering and production of practical knowledge. A mechanical design of the general procedures, methods, design rules and technical measures, and combined with production practice, Peiyang analysis and practical problem solving ability of general engineering, with a mechanical transmission device, a simple mechanical design and manufacturing capabilities.  Key words: oil drilling workover equipment；tap body； gear； hydraulic motor 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc295653734 1 绪论 PAGEREF _Toc295653734 \h 1 HYP