《马达支架级进模设计毕业设计》.docVIP

马达支架级进模设计 摘 要：冲压是指板料经分离或成形而得到制件的方法。冲压利用冲压模具对板料进行加工。常温下进行的板料冲压加工称为冷冲压。模具工业是现代工业发展的基础，是大批生产同形产品的工具，是工业生产的主要工艺设备。冲压模具是模具工业的重要组成部分，模具工业是国民经济的基础工业。近年来，与机械相关的各个行业都越来越重视模具的设计与应用，不仅是因为模具已发展成为一项比较成熟的共性技术模具工业中发挥越来越重要的作用。The Motor Bracket Design of Progressive Mold Abstract: Stamping is refers to the sheet metal forming by separation or by stamping method. Stamping use of stamping dies for sheet metal processing. Room temperature for sheet metal stamping process called cold stamping. Mould industry is the basis for the development of modern industry, it is mass production tools, products of the same type is the main process equipment in industrial production. Stamping die is an important part of mold industry, mold industry is the basic industry of national economy. In recent years, with mechanical or related industries are pay more and more attention to mold the design and application, not only because the mould has developed into a relatively mature technology, but also because the mold plays more and more important role in modern industry, the mold to ensure the accuracy of the stamping product size, make the product quality is stable, and the processing surface without breaking the product. In this graduation design, first introduced the structure of the motor bracket, analyzes its technological characteristics, according to the structure characteristics of mould design. Which expounds the forming of the parts of progressive die strip layout design, workstation design, convex, concave die mold overall structure design, mold design, fixed plate design, and carried lifter device, stripper plate structure and each parts material and heat treatment technical requirements, etc. The mold structure is relatively complex, but the processing quality well, high production efficiency, suitable for mass production in factories. In the design process, will inevitably encounter some difficulties, but through hard work finally settled. This design is a comprehensive practice of