高能成型原理-游志涛讲解.pptVIP

报告人：游志涛 导　师：李爱农 2016年05月26日 高能成形原理与技术汇报 Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration author：R. Mendes , J.B. Ribeiro , A. Loureiro To appear in: Materials and Design Accepted date: 22-4-2013 Keywords：Explosive welding 、Emulsions explosive 、 Low alloy and stainless steels List Innovation Introduction Experimental procedure Results and discussion Conclusions 1.Innovation Using explosive welding to obtain parts we wanted analyzing the effect of ammonium nitrate-based emulsion, sensitized with different quantities and types of sensitizing agents (hollow glass microballoons orexpanded polystyrene spheres) and Ammonium Nitrate Fuel Oil (ANFO) explosives on the interface characteristics 2.Introduction history Explosive cladding or welding was first observed during World War I 1944： L.R. Carl carried out the first experiments 1950s: more thorough investigations were conducted by Rinehart and Pearson 1960s: Philipchuck , Davenport and Duvall , Holtzman and Ruderhausen , Deribas et al. 1960s-2008:Deribas and his team Attempts to relate the explosive welding parameters to the characteristics of the interfacial waves 2013: study the influence of the explosive characteristics, in particular the type,amount and size of sensitizers on the interfaces features in a cylindrical configuration the commercialization of explosive welded plates began at DuPont(1962) Introduction Explosive welding is a solid state process in which the detonation of a certain amount of an explosive composition accelerates one of the materials to be welded against the other in order to promote a high-velocity oblique collision (see Fig. 1) that causes severe, but localized, plastic flow at the interacting surfaces.it is also a cold technique whereby no external heat is used to promote the bonding. Fig. 1. Schematic