beambottomwoodsquarerootnumber.docVIP

beam bottom wood square root number: 3 7, wood square section specifications: 50 * 80 mm 8, beam bottom wood square distance: 175 mm 9, small beam bottom bar: phi 48 x 3.5 steel pipe 10, small bar spacing: 500 mm 11, beam side stud space: 1 m 12, beam side span poling direction space (less than) : 1 m 13, poling basis: 50 mm thick concrete floor with wooden planks 14, Max tonetto jacking beam type: no beam 15, beam bottom rod span direction spacing (less than) : 1 m 16, beam bottom rod transverse spacing: 0.33 m 17, horizontal bar interval: 1.5 m 18, the top plate under 2 level step length is adjusted for: 0.95 m 19, level rod assembly steps (including sweep the floor and at the top of the encryption area, do not contain additional levels under beam) : step 4 20, sweeping stem from the body surface: on the basis of 200 mm Under 21, plate rack body contains set-up height adjustable bracket (to the top, buckle plate thickness) : 3.91 m 22, the bottom of the beam top stud with set-up height adjustable bracket () to the top, buckle plate thickness: 3.31 m 23, the support frame body calculation height (equal to the height) : 4.2 m 24, poling under plate support free end height: 400 mm 25 and under beam poling support free end height: 400 mm 26, beam under whether additional horizontal bar: additional a horizontal bar, the beam under the topside poling free end height control within 500 Third, lateral beam template parameters: 1, the beam breadth: 400 mm 2, beam height: 700 mm 3, floor thickness: 100 mm 4, template materials: plywood 5, the thickness of the template: 15 mm 6, beam side wood square root number, root 7, wood square section specifications: 50 * 80 mm 8, wood square distance: 315 mm 9, selection of the main keel: double steel pipe (no more than 10, the main keel spacing) : 450 mm 11, the bolt diameter: 14 mm 12, the bolt number: 2 13, the vertical distance between bolt: 300 mm 14, the first line of bolts from the bottom of the beam: 150 mm 15, the bolt spacin