毕业论文浅谈电子产品的防护措施.docxVIP

南京信息职业技术学院毕业设计论文作者 学号 系部 专业 题目 指导教师 评阅教师 完成时间： 2015 年 4 月 10 日毕业设计(论文)中文摘要题目：浅谈电子产品的防护措施摘要：随着电子行业的飞速发展，大量的电子产品出现在人们的生活中，这些电子产品变得更加的精密，更加复杂，这也使得它们在生产和使用中更加容易受到各种因素的影响，伴随着电子技术的不断提高，由此也诞生了更加完善的电子防护措施。对电子产品生产企业而言，在电子产品工作时，其输出功率只占产品输入功率的一部分，其损失的功率都以热能形式散发出去，尤其是功耗较大的元器件，所以，采用有效地热设计方案变得尤为重要。另外，静电防护系统是企业生产系统的基础性工程，它是产品高可靠性的保障。我们不单单要在设备上用到静电防护，也要在生产过程中设计并严格按照静电防护程序来工作。运用行之有效的防护程序，减少静电的产生，降低静电带来的不必要的损失。本文就对热设计、减振与缓冲、静电防护等方面进行探讨。 关键词 : 热设计；静电防护；接地；减振与缓冲毕业设计(论文)外文摘要Title:Introduction to electronics protective measuresAbstract: With the rapid development of electronic industry, a large number of electronic products in peoples life, these electronic products become more sophisticated, more complex, which makes them in the production and use more easily affected by various factors, along with electronic technology unceasing enhancement, which also was born to be more perfect electronic protective measures. For electronic products manufacturing enterprises, in the electronic products, the output power is only part of the product in the input power, the loss of power is distributed in the form of heat, especially the larger power components, therefore, adopt effective design of geothermal is particularly important. In addition, electrostatic protection system is the basis of the enterprise production system, it is the guarantee of the product high reliability. As production managers and engineering technical personnel, not only to the electrostatic protective design to the product, must also be in the process of production to establish a set of perfect and feasible electrostatic protection system. By adopting effective means, process control and prevent electrostatic damage, minimize the loss caused by static electricity. In this paper, the design of heat, shock absorption and buffer, and discusses the electrostatic protection, etc.keywords: Thermal design; Electrostatic protection; grounding; Damping and the buffer目录一 引言1二 热设计12.1 热设计概述12.1.1 热传导12.1.2 热对流22.1.3 热辐射