通信工程专业英英语信工程专业英英语.docVIP

信 息 工 程 学 院 课 程 设 计 报 告 题目：基于FPGA的智能电梯控制系统的实现 Topic: INTELLIGENT ELEVATOR CONTROL SYSTEM 二 级 学 院 信 息 工 程 学 院 专 业 班 级 通 信 工 程2班 组 员 2014年 4 月 25日 ABSTRACT Intelligent elevator compilation process is not easy. And I tried a variety of ways to realize the transfer of the state. At first I thought the affirmation is a finite state machine. But due to start I thought only six request (respectively for 1 ~ 6 / f) and then in teacher inspired and east ten on the second floor of the elevator actual operation situation I found, 6 button affirmation is not enough, so I added five upward request button and five downward request button, so it has 16 button, because at that time I didnt think by signal and inverted method, so need analysis of true is too many, I also have no confidence. Nevertheless the problem are always to be solved, later I in our bedroom is a classmate of reference books on saw a with VHDL language preparation intelligent elevator controller program, but is not complete, it gives me the greatest inspiration is signal and inverted algorithm, I discovered this way, then my workload is greatly reduced.I was not only use signal and inverted algorithm outside, still adopted its to the floor for elevator status transfer basis thought, it is really a good method, but I havent made any progress, one is it is with VHDL language preparation, and Im not very familiar with the language so not particularly understanding. KEY WORDS： A signal and buy ?verilog? CONTENTS Chapter I SUMMARY 4 1.1 Introduction And Features of FPGA 4 1.2 VHDL Language And Procedures Outlined 5 1.2.1 VHDL Language Development .5 1.2.2 VHDL Language Features 6 Chapter II ANALYSIS OF THE ELEVATOR CONTROL SYSTEM ……………………..7 2.1 Background Elevator Control 7 2.2 Specific Purpose And Design Of The Elevator Control Requirements 7