serialport.cpp SerialPort和SerialPort.cpp.docVIP

serialport.cpp SerialPort和SerialPort.cpp 导读：就爱阅读网友为您分享以下“SerialPort和SerialPort.cpp”资讯，希望对您有所帮助，感谢您对92的支持! /*** FILENAME CSerialPort.h ** ** PURPOSE This class can read, write and watch one serial port. ** It sends messages to its owner when something happends on the port ** The class creates a thread for reading and writing so the main ** program is not blocked. ** ** CREATION DATE 15-09-1997 ** LAST MODIFICATION 12-11-1997 ** ** AUTHOR Remon Spekreijse ** ** */ #ifndef __SERIALPORT_H__ #define __SERIALPORT_H__ #define WM_COMM_BREAK_DETECTED WM_USER+1 // A break was detected on input. #define WM_COMM_CTS_DETECTED WM_USER+2 // The CTS (clear-to-send) signal changed state. #define WM_COMM_DSR_DETECTED WM_USER+3 // The DSR (data-set-ready) signal changed state. #define WM_COMM_ERR_DETECTED WM_USER+4 // A line-status error occurred. Line-status errors are CE_FRAME, CE_OVERRUN, and CE_RXPARITY. #define WM_COMM_RING_DETECTED WM_USER+5 // A ring indicator was detected. #define WM_COMM_RLSD_DETECTED WM_USER+6 // The RLSD (receive-line-signal-detect) signal changed state. #define WM_COMM_RXCHAR WM_USER+7 // A character was received and placed in the input buffer. #define WM_COMM_RXFLAG_DETECTED WM_USER+8 // The event character was received and placed in the input buffer. #define WM_COMM_TXEMPTY_DETECTED WM_USER+9 // The last character in the output buffer was sent. class CSerialPort { public: // contruction and destruction CSerialPort(); virtual ~CSerialPort(); // port initialisation BOOL InitPort(CWnd* pPortOwner, UINT portnr = 1, UINT baud = 9600, char parity = ‘N’, UINT databits = 8, UINT stopsbits = 1, DWORD dwCommEvents = EV_RXCHAR | EV_CTS, UINT nBufferSize = 512); // start/stop comm watching BOOL StartMonitoring(); BOOL RestartMonitoring(); BOOL StopMonitoring(); DWORD GetWriteBufferSize(); DWORD GetCommEvents(); DCB GetDCB(); void WriteToPort(char* string); protected: // protected memberfunctions void Proce