（全新）工程数字信号处理2_09.pptVIP

数字波形分析技术 MATLAB中的声卡操作函数 Fs = 44100; dt=1.0/Fs; T =2; N=T/dt t=[0:N-1]/N; x =2000*sin(2*pi*600*t); plot(t,x); axis([0, 0.01, -2500,2500]); wavplay(x,Fs); 数字波形分析技术 MATLAB中的声卡操作函数 Fs = 44100; N=44100 t=[0:N-1]/N; x=wavrecord(N,Fs); plot(t,x); 数字波形分析技术 声卡信号分析产品 数字波形分析技术 我们的声卡仪器 ? Project1: 基本要求: 将声卡做为D/A，用C++、 MATLAB或你熟悉的语言设计一个数字信号发生器. 扩展功能: 1. 数字电子琴实现 2. 4合弦手机铃声实现 3. 双音频电话拨号音实现 内容包括同类产品情况、设计原理、实现方法、参考文献。 数字波形分析技术 Right now, Catch a magic moment, Do it Right here and now One more walk through problems, Built up, and stand in our way , …….. 数字波形分析技术 Project报告书要求 摘要 概述(目的、意义) 技术路线 实现方法 存在的问题 结束语 致谢 参考文献 数字波形分析技术 数字波形分析技术 工程声学课程(难度系数4)实践项目简介 工程声学课程(难度系数4)实践项目简介 工程声学课程(难度系数4)实践项目简介 Sound Quality Automobile Evaluations Written Report The report should be a minimum of ten double spaced pages. 1) Summary (or abstract). This section of up to 200 words maximum should state what is in the report, so that people know whether they want to read it. It should not be an introduction to the subject. 2) Introduction. This section should give a short review of the background to the subject of the report. It should describe the importance of sound quality for marketing and passenger acceptance of the sound of automobiles. A minimum of three, four or five references need to be provided, with brief comments about what they say about the subject. 工程声学课程(难度系数4)实践项目简介 3) Method. A short description must be given of the method we used with our own juries to evaluate the sound quality of the actual vehicles on the road. The dummy head recording procedure and laboratory evaluations with earphones and with loudspeakers should be briefly described. 4) Results. Plots should be given of the road results for two or more cars on the same figure. Similarly plots should be given of the lab results for two or more cars on the same figure from the earphone and/or loudspeaker evaluations. Some brief discussion should be provided about these results. 工程声学课程(难度系数4)实践项目简介 工程数字信号