本科毕业设计-连接座塑件注射模设计.docVIP

连接座塑件注射模 学 院 专 业 班 级 学 号 姓 名 指导教师 负责教师 沈阳航空2015年6月摘 要 ，采用分型面一模两腔板式结构，制件壁厚，型芯组合式。 关键词：组合镶拼The design of the injection mould is connection receptacle injection mold, parting line of a mold two cavity and three-plate type structure, the thickness of most uniform, and the cavity depth is moderate, so by plunger putting institutions.And institutions with a guide pin and guide sleeve,ensure the smooth action. Plastic parts production batch is large, so the core combination of inlaying, worn for replacement. The first type of mechanism adopts fixed distance rod