最实用的一线《试油》英语学习资料.docVIP

英语资料 1. Todays work is swabbing drainage（今天的工作是抽汲排液） 2. March 31 8:00-16:00 swabbing drainage under 16 times, deep: 2000m, liquid level: 1800m, spare oil: 1.43 m 3, already buckle bubble 10% 12%, emulsify water: aquifer 3, free water 0.20 m 3 1.36 m3, Cl - : 15957mg/L, PH: 6, contain arenaceous 0.（3月31日8:00-16:00抽汲排液16次,下深:2000m,液面:1800m,抽出油:1.43m3,已扣气泡10%含水12%,乳化水:0.20m3,游离水1.36m3,Cl-:15957mg/L,PH:6,含砂0.） 3. Try oil production dynamic report（试油生产动态汇报） 4. Up D73.02 mm outer thickening tubing 45 root (unfinished),（起D73.02mm外加厚油管45根（未完)，） 5. Bad, the workover machines motorcycle（修井机坏，修机车） 6. 73.02 mm within D: outer thickening tubing 25 root, bring out d62mm blasting stylus（起D：73.02mm外加厚油管25根，带出d62mm冲砂笔尖） 7. 73.02 mm next D: outer thickening the tubing with D100mm 130 root, screw pump and D116mm cone bit a set of three, at the root square into 1.57 m pressurized 20kN Ethan grey surface, H: 1231.94 m, after Ethan 2 times depth is changeless, complete 1231.50 m to:.（下D：73.02mm外加厚油管130根，底带D100mm螺杆泵及D116mm三牙轮钻头一套，末根方入1.57m加压20kN探灰面，H：1231.94m，复探2次深度不变，后完成至：1231.50m。） 8. Use Cl - 177mg/L, PH: 7 15m 3 are circulating water drilling ash P: 0MPa, cork, P: qv: 500L/min, pressurized 0-30kN no footage.（用Cl-177mg/L,PH：7的清水15m3正循环钻灰塞，P：0MPa，qv：500L/min,加压0-30kN无进尺。） 9. 73.02 mm within D: outer thickening tubing 130 root, bring out D100mm screw pump and D116mm cone bit a set of three（起D：73.02mm外加厚油管130根，带出D100mm螺杆泵及D116mm三牙轮钻头一套） 10. 73.02 mm next D: 130 root, outer thickening of tubing with D: 116mm stamping.（下D：73.02mm外加厚油管130根，底带D：116mm铅印。） 11. Use Cl - 177mg/L, PH: 7 3 are circulating water 10m rinse, P: 0MPa, qv: 500L/min, pressurized 30kN dozen stamping, H: 1231.94 m.（用Cl-177mg/L,PH：7的清水10m3正循环冲洗，P：0MPa，qv：500L/min,加压30kN打铅印，H：1231.94m。） 12. Up D73.02 mm outer thickening tubing 130 root, out there D116mm stamping (Wells round steel wire and fall content).（起D73.02mm外加厚油管130根，带出D116mm铅印（井内有钢丝绳及圆状落物）） 13．Send fishing tools.（等送打捞工具。） 14. 73.02 mm next D: outer thick