extrutech f o r m system（extrutech f o r m系统）.doc

Extrutech Plastics, Inc. February 2014 5902 West Custer Street Manitowoc, Wisconsin 54220 Toll Free 888-818-0118 Phone 920-684-9650 Fax 920-684-4344 Website E-mail info@ Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The CSI Construction Specifications Practice Guide. This section must be carefully reviewed and edited by the Architect to meet the requirements of the project and local building code. Coordinate this section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section. Section numbers and titles are from MasterFormat 2012 Update. 03 11 26 PERMANENT WALL FORMING Specifier Notes: This section covers Extrutech Plastics, Inc. “Extrutech FORM System” permanent, rib-reinforced, PVC forms for cast-in-place concrete walls with interior, prefinished, washable, PVC wall panel surface. Consult Extrutech Plastics, Inc. for assistance in editing this section for the specific application. GENERAL SECTION INCLUDES Permanent, rib-reinforced, PVC forms for cast-in-place concrete walls with interior, prefinished, washable, PVC wall panel surface. RELATED SECTIONS Specifier Notes: Edit the list of related sections as necessary. Limit the list to sections with specific information that the reader might expect to find in this section, but is specified elsewhere. Section 03 30 00 – Cast-in-Place Concrete: Concrete placed in permanent PVC forms for walls. Section 06 64 00 – Plastic Paneling. Section 07 92 00 – Joint Sealants. REFERENCE STANDARDS Specifier Notes: List reference standards used elsewhere in this section, complete with designations and titles. ASTM D 3273 – Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber. ASTM D 3274 – Standard Test Method for Evaluat