ppt课件-plopplopfizzfizz-wikispaces.pptVIP

Plop Plop Fizz Fizz By Lindsay Pembleton Abstract Plop Plop Fizz Fizz The purpose of this project was to study the effect of temperature on the rate of a chemical reaction. The experiment involved dropping an Alka Seltzer tablet in 3 different temperature waters and observing the reaction and measuring the reaction time. My observations supported my hypothesis that the tablet would dissolve quicker in the hot water rather than in the room temperature or cold water. Planning Materials Alka Seltzer Tablets Thermometer Glass cup – 12 ounce Measuring cup Stopwatch Hot, Ice, and Room Temperature Water Tape A helper to press the stopwatch Planning (continued) Procedure Gather materials. Use the measuring cup to add 8 ounces of ice water to the glass. Record the temperature. Mark the water level with a piece of tape, the tape will now show where to fill the glass for each trial. Get the stopwatch and have your helper press the start button as you drop an Alka Seltzer tablet into the water. Wait until nothing appears to be happening and stop the stopwatch. Planning ( continued) Procedure ( continued) Record how long the chemical reaction took to complete, and what happened. Repeat steps 2, 4, and 5 for the room temperature water and hot water Place the tablets in 3 different temperature water 4 times and record the results all times to make results accurate. Put all data recorded on the reaction time on a graph. Bullet other information such as what happened. Data Data (Continued) In the hot water the process was very fast. The tablet fizzed rapidly at the top. The water bubbled and some flew out of the glass. Results were consistent. In the ice water the process was very slow. The tablet fizzed at the bottom and floated to the top when the reaction was almost completed. The water bubbled but not as fast. Results were consistent. In the room temperature water the tablet also fizzed at