骨科手术钢板__培训课件.ppt

用于腓骨远端后外侧骨折 骨板分左右 规格： 3.5mm system: 2~20 holes Ankle Joint 踝关节 Distal Posterior/Lateral Fibular Plate 腓骨远端后外侧钢板 用于跟骨外侧骨折 骨板分左右 规格： 3.5mm system Ankle Joint 踝关节 Lateral Calcaneal 跟骨外侧钢板 Q A Q: Peri关节周围解剖骨板系列针对哪些关节周围骨折? Q: Peri关节周围解剖骨板的特点? Q: Peri骨钉的特点? Diana Chen * Step 3 You may not have to go through this process; however, it may help build up Zimmer’s overall reputation and commitment to trauma. Show the doctor the picture of the computer model inside the first page of the brochure. Point out that we starting with the bone rather than the implant. We recognized that we needed to first understand where we wanted to put the implant. This was actually facilitated by having the developing surgeons draw on a sawbone where they would like a plate to go if they could have one that would actually fit. Using the computer data on the bones we were able to use an “electronic cookie cutter’ to acquire the exact shape we were looking for. This data was then used to make a prototype right off of the bone scans. Rather than start with a piece of metal and trying to bend it to fit; we started with a bone and made an implant that would fit. We tried different shaped until we found the shape that fit the most bones the best. The plates will not fit everyone perfectly; however, they are so much better than anything else available it is incredible. These are high tech plates that requirea high tech manufacutring process to maintain the contour. Sell the technology aspect. Confidence in your hands * Confidence in your hands 三维计算机模拟技术 特点 / 益处 预塑形 圆钝边缘设计 简单易用 提供理想的贴合、节省时间 减少对软组织的刺激 无需特殊手术技术 Peri Screw System 专 用 低 平 头螺 钉 低平头螺钉– 减少对软组织刺激 2. 3.5mm和4.5mm皮质骨钉为自攻骨钉,节省手术时间. Basic System: 4.5mm自攻皮质骨钉 6.5mm松质骨钉（16mm) 6.5mm松质骨钉（32mm) 6.5mm松质骨钉（全螺纹） Small System: 3.5mm 自攻皮质骨钉 4.0mm半螺纹松质骨钉 4.0mm全螺纹松质骨钉 Periarticular Plate System 特点 好处 1 骨板从厚到薄的解剖设计 操作简便 节约手术时间 能自动贴合骨骼解剖形态 2 骨板远端圆钝型设计 减少了骨板对软组织的刺激 3 特殊的低平头螺钉设计 降低了螺钉对软组织的刺激，尤其是软组织覆盖较薄弱处