Section - Security Doors and Frames【DOC精选】.docVIP

SECTION 08 34 53SECURITY DOORS AND FRAMES SPEC WRITER NOTE: Delete between //// if not applicable to project. Also delete any other item or paragraph not applicable in the section and insert additional items required by project and renumber paragraphs. Identify all frames by types. Verify that drawings show the required doors and frames. See VA Physical Security Design Guide for security requirements Obtain blast resistance requirements from Physical Security Design Standards Definitions, a separate publication provided by the VA. PART I - GENERAL 1.1 Description A. The extent of forced-entry resistant (FE) and ballistic resistant (BR) door assemblies required for the Project is indicated on Contract Drawings, and in Door/Frame/Hardware schedules, including construction, profiles, swing, sizes, hardware, accessories, devices, and locations. 1.2 RELATED Work A. Refer to Division 3, CONCRETE. B. Refer to Division 4, MASONRY. C. Refer to Division 5, METALS for steel supports. D. Doors and frames not designated for special security performances: // Section 08 11 13, HOLLOW METAL DOORS AND FRAMES // // Section 08 14 00, WOOD DOORS //. E. Windows and frames of a forced entry/ballistic resistant rated: Section 08 56 53, SECURITY WINDOWS F. Door Hardware: Section 08 71 00, DOOR HARDWARE. G. Glazing and ballistic rated glazing: Section 08 80 00, GLAZING. H. Package transfer boxes: Section 11 17 36, PACKAGE TRANSFER UNITS. I. Deal trays of a Forced Entry/Ballistic Resistant rating: Section 08 56, 59, SERVICE AND TELLER WINDOW UNITS. J. Guard Booths: Section 13 34 19, METAL BUILDING SYSTEMS. K. Card readers and biometric devices: Section 28 13 11, PHYSICAL ACCESS CONTROL SYSTEMS L. Intrusion alarm: Section 28 16 11, INTRUSION DETECTION SYSTEM 1.3 PERFORMANCE REQUIREMENTS A. General: Fabricate and install FE/BR door assemblies to achieve indicated levels of resistance. Extend resistance to include anchorages, interfaces with adjoining substrates, and hardware. Securi