螺丝分类命名及编码.doc

品名代号对照表 1ATAPPING SCREWS自攻螺丝（MM）S/T/S2BHEX TAP BOLTS六角螺栓（全牙）HEX TAP BOLT3CHEX CAP SCREWS（有华司面）六角螺丝HEX CAP SCREWS4DDRYWALL SCREWS墙用螺丝（IN+MM）D/W/S5ETAPPING SCREWS自攻螺丝S/T/S6FDRYWALL SCREWS墙用螺丝（IN）D/W/S7GSELF DRILL SCREWS（TEK SCREW）钻尾螺丝（MM）S/D/S8HSELF DRILLING SCREWS澳洲钻尾螺丝SELF DRILLING SCREWS9IBOLTS螺栓BOLT10JDRYWALL SCREWS澳洲墙用螺丝DRYWALL SCREWS11KSELF TAPPING SCREWS澳洲攻牙螺丝SELF TAPPING SCREWS12LSELF DRILL SCREWS（TEK SCREW）钻尾螺丝（IN）S/D/S13MMACHINE SCREWS机械螺丝（IN）M/S14NNUTS螺帽（IN）NUT15OCHIPBOARD SCREWS塑板螺丝（IN）C/S16PHEX MACHINE BOLTS六角全牙（正常牙）（IN）HEX MACHINE BOLTS17QCHIBOARD SCREWS塑板螺丝（MM）C/S18RSTAINLESS STEEL TAPPING SCREWS不锈钢自攻钻尾S/T/S19SSTAINLESS STL SCREWS不锈钢钻尾螺丝S/D/S20TTAPPING SCREWS自攻螺丝（IN）S/M/S21UBIT二号十字起子NO.2 PHILLIPS BIT22VWOOD SCREWS木螺丝（MM）W/S23WWOOD SCREWS木螺丝（IN）W/S24XSELF TAPPING SCREWS DIN STANDARD自攻螺丝（DIN标准）S/T/S TO DIN25YDRYWALL SCREWS墙用螺丝（MM）D/W/S26ZSELF DRILL SCREWS钻尾螺丝（IN+MM）S/D/S270METAL NEOPRENE WASHER铁华司+橡胶华司METAL NEOPRENE WASHER281MACHINE SCREWS机制螺丝（IN+MM）M/S293STAINLESS SHEET METAL SCREWS不锈钢攻牙螺丝（IN）S/T/S304MACHINE SCREWS机制螺丝（MM）M/S315SPECIAL SCRES特殊螺丝（通用）SPECIAL SCREWS326HEX HEAD SCREWS六角头螺丝（MM）HEX HEAD SCREWS337STAINLESS WOOD SCREWS不锈钢木螺丝S/W/S348SPECIAL SCREWS特殊螺丝（IN）SPECIAL SCREWS359DRYWALL SCREWS高品质墙用螺丝D/W/S36aBRASS WOOD SCREWS黄铜木螺丝BRASS WOOD SCREWS头穴形状编码表 1A#1 PHIL AND SQUARE RECESS1号十字四角孔#1 PHIL/SQ2B#2 PHIL AND SQUARE RECESS2号十字四角孔#1 PHIL/SQ3CPHIL AND SLOT RECESS十字割沟PHIL/SLOT4DTORX RECESS梅花孔TORX5E#1 SQUARE RECESS1号四角孔#1 SQ6F#3 SQUARE RECESS1号四角孔#3 SQ7G#1 PHILLIPS RECESS1号十字孔#1 PHIL8HHEX SOCKET RECESS六角孔HEX SOCKET9IONE WAY SLOTTED单项割沟ONE WAY SLOT10JPOZI AND SLOT RECESS米字割沟POZI/SLOT11K#3 PHILLIPS RECESS3号十字孔#3 PHIL12L#1 SQUAR SLOT1号四角孔割沟#1 SQ/SLOT13MSAW SLOT （MECHANICAL SLOT）机械割沟SAW SLOT14N#2 SQUARE RECESS（UAB）2号四角孔（UAB）客户#2 SQ15O#0 SQUARE RECESS0号四角孔#0 SQ16P#2 PHILLPS RECESS2号十字孔#2 PHIL17Q#2 SQUARE RECESS2号四角孔#2 SQ18RMFGR MARKS “TY”头记“TY”WITH MFGR MARKS “TY“19SSTRUCK SLOT直接割沟STRUCK SLOT20TPHIL AND SQUARE RECESS十字四角孔PHIL/SQ21U#2 SQUARE SLOT2号四角孔割沟#2 SQ/SLOT