硬件收报-协议层.docVIP

收报的一般流程流程 初始化设备时申请了DMA buffer，用来收报文，初始化的末尾阶段，开启中断，等待数据包到来；数据报文来了之后，一般硬件上有rx_buf（是个FIFO，先进先出，类似管道），当rx_buf数据到达一定容限，或者超时，触发硬件收报中断，报文以DMA方式传送到DMA buffer，然后向协议层报告数据报文的所在的DMA buffer地址等描述符相关信息，协议层完成剩余的处理流程，处理完成后一般还有一个反馈过程，但是我们的驱动中没有这样的过程。 硬件寄存器定义 /* DMA Control and Interrupt Registers */ #define AR_CR 0x0008 /* MAC control register */ #define AR_RXDP 0x000C /* MAC receive queue descriptor pointer */ #define AR_CFG 0x0014 /* MAC configuration and status register */ #define AR_IER 0x0024 /* MAC Interrupt enable register */ /* * Get the RX Descriptor. */ u_int32_t ar5416GetRxDP(struct ath_hal *ath) { return OS_REG_READ(ath, AR_RXDP); } /* * Set the Rx Descriptor. */ void ar5416SetRxDP(struct ath_hal *ah, u_int32_t rxdp) { OS_REG_WRITE(ah, AR_RXDP, rxdp); HALASSERT(OS_REG_READ(ah, AR_RXDP) == rxdp); } HAL 层的API /* * Hardware Access Layer (HAL) API. * * Clients of the HAL call ath_hal_attach to obtain a reference to an * ath_hal structure for use with the device. Hardware-related operations * that follow must call back into the HAL through interface, supplying * the reference as the first parameter. Note that before using the * reference returned by ath_hal_attach the caller should verify the * ABI version number. */ struct ath_hal（）{//结构体 ………. //硬件收报相关的函数指针表 /* Receive Functions 定义*/ u_int32_t __ahdecl(*ah_getRxDP)(struct ath_hal*); void __ahdecl(*ah_setRxDP)(struct ath_hal*, u_int32_t rxdp); void __ahdecl(*ah_enableReceive)(struct ath_hal*); HAL_BOOL __ahdecl(*ah_stopDmaReceive)(struct ath_hal*); void __ahdecl(*ah_startPcuReceive)(struct ath_hal*); void __ahdecl(*ah_stopPcuReceive)(struct ath_hal*); void __ahdecl(*ah_setMulticastFilter)(struct ath_hal*, u_int32_t filter0, u_int32_t filter1); HAL_BOOL __ahdecl(*ah_setMulticastFilterIndex)(struct ath_hal*,