ColoradoSpaceGrantConsortium.pptVIP

Student Hands On Training Workshop (SHOT 2007) June 14 - 16, 2007 Step 16: Verify solder joint and clip leads Hands-on: Soldering 30 Step 17: Install RED LED over 120 kΩ Resistor Negative side is facing edge of board Hands-on: Soldering 31 Negative Lead Step 18: Install GREEN or YELLOW LED over 33 kΩ Resistor. Negative side is facing edge of chip Hands-on: Soldering Negative Lead 32 Step 19: Flip board over and solder LED leads Hands-on: Soldering 33 Step 20: Solder chip to board. Go slow Hands-on: Soldering 34 Step 21: Verify solder joints and check for solder bridges Step 22: