长方形角筒的冲模与拉伸模设计【毕业论文+CAD图纸全套】.doc

摘 要 根据冲压模工艺原理，结合产品结构的特点，采用倒装复合模冲裁生产和弹性卸料的结构形式，设计的复合模经生产实践验证，其结构简单实用，冲压工艺过程稳定可靠。设计中分析了工件的冲压工艺性，计算了毛坯排样、冲压力、刃口尺寸计算等。进行了模具总体结构、主要零部件的设计，绘制了模具装配图和零部件图。零件的拉深工艺性能较好，经计算校核可以一次成型。 关键词：倒装复合模；弹性卸料；冲压、拉深工艺；模具设计 Abstract  According to the principle of the stamping die process, combining with the characteristics of product structure, adopt inversion compound die blanking production and the structure of the elastic unloading, Design of compound die verified by production practice, and its structure is simple and practical, stamping process is stable and reliable. Artifacts are