何淼的外文翻译.docVIP

2010届学生毕业论文（设计） 存档编号：__________ 毕业论文外文翻译 原文题目：Application of Pro / ENGINEER software for three-dimensional wiring 译文题目：Pro／软件的应用 院： 机电与建筑工程学院 专 业： 机械设计及其自动化 姓 名： 何淼 学 号： 201006101411 指导老师： 彭和平老师 2014 年 3 月 8 日 Application of Pro / ENGINEER software for three-dimensional wiring I. Introduction 1. Three-dimensional wiring in electronic equipment design and manufacture of the role of This article refers to three-dimensional wiring, meaning that the design of line bundle map. In the traditional production process, bar-line design and production is generally carried out in the final assembly stage, the bar-line is the design and manufacture of electronic equipment manufacturing process one of the most important aspects. 2. Electronic equipment requirements of the three-dimensional wiring With the rapid development of design technology, manufacturing industry is concerned,the increasingly stringent requirements, mainly in the following areas. (1) With the electronic equipment to update the rapid pace of product from design to market-oriented process has become increasingly short of time, which requires manufacturers to adapt to the market as soon as possible and design of the rhythm of the rapid changes in the design at the same time three-dimensional wiring, cabling will be three-dimensional potential problems in the design stage. (2) With the miniaturization of electronic devices, modular development, as well as equipment and the structure of the increasing complexity of internal alignment, equipment, internal structure and alignment of electromagnetic environment on a higher demand. (3) In addition to this important function of factors, the production costs of electronic equipment is also a an important factor in the pros. Product function in a similar case, to shorten the production cycle, reduce labor costs and raw material consumption and waste reducti