【物理】泛亚简介.pptVIP

泛亚简介PATAC overview 2009-4-29 目录Agenda 全球工程体系 Global engineering system 泛亚业务范围 PATAC business scope 开发人员/设施 Engineering staff facility 完成项目一览 Accomplishment overview 成立之初设定的能力目标 Preliminary capability target set when establishment 泛亚是通用亚太地区的工程成员PATAC is one of GM AP engineering centers 泛亚是通用全球工程中的一员PATAC is also a member in GM global engineering 全球联盟凝聚全球工程的力量Organization alignment condenses global engineering strength 泛亚和通用全球工程矩阵紧密相连PATAC is tightly linked to global engineering matrix 目录Agenda 全球工程体系 Global engineering system 泛亚业务范围 PATAC business scope 开发人员/设施 Engineering staff facility 完成项目一览 Accomplishment overview 造型设计Styling and design 整车分析－CAEVehicle analysis - CAE 结构碰撞及乘员保护模拟Crashworthiness and occupant protection simulation 结构刚度、强度及耐久性分析Structural stiffness, strength and durability analysis 振动噪声模拟 Noise vibration simulation 气动及热模拟 Aero and thermal simulation 车辆动力学模拟/ 静态分析 Vehicle dynamic simulation/ static analysis 刚度和强度 Stiffness and stress 动态分析－模态 Dynamic analysis - modal 整车分析－总布置Vehicle analysis - packaging 整车平台前期开发与研究 设计工程支持 舱室集成设计 设计质量认证 车辆结构 整车物理集成 对比和设计支持 表面质量评审 整车性能分析 Advanced vehicle development study Studio designing engineering Compartment integration designing engineering Design quality verification (DQV) Vehicle architecture Total vehicle physical integration Benchmarking and studio support Surface quality verification Vehicle performance analysis 工程设计Engineering design 根据通用全球整车开发流程，对车辆的整车、系统和零部件进行工程开发 Use GM common GVDP process to develop the vehicle, system and component. 试验室试验 Lab testing 试验室试验 Lab testing 道路试验Road testing 试车场Proving ground 总投资：16亿人民币 Total investment: 1.6 billion RMB 占地面积约5.6平方公里，距泛亚约2.5小时车程。 Space: 5.6 square kilometers (1.5x3.9 km), 2.5 hours drive from PATAC 能力：建成后可同时容纳140辆汽车进行试验，预计年试验总里程可达2000万公里。 Capacity: 140 vehicles testing capacity, and estimated annual total mileage 20 millio