roseburgforestproducts.docVIP

Roseburg Forest Products 10599 Old Hwy 99 South Dillard, OR 97432 Phone: (800) 245-1115 Fax: (541) 679-2543 E-mail: ewpsales@ This MANU-SPEC utilizes the Construction Specifications Institute (CSI) Project Resource Manual (PRM) including MasterFormat?, SectionFormatTM and PageFormatTM. A MANU-SPEC is a manufacturer-specific proprietary product specification using the proprietary method of specifying applicable to project specifications and master guide specifications. Optional text is indicated by brackets []; delete optional text in final copy of specification. Specifier Notes typically precede specification text; delete notes in final copy of specification. Trade/brand names with appropriate symbols typically are used in Specifier Notes; symbols are not used in specification text. Metric conversion, where used, is soft metric conversion. This MANU-SPEC specifies engineered wood I-Joists for use in floor and roof framing. I-Joists are fabricated with laminated veneer lumber (LVL) or solid sawn lumber top and bottom flanges and oriented strand board (OSB) webs. These products are manufactured by Roseburg Forest Products. Revise MANU-SPEC section number and title below to suit project requirements, specification practices and section content. Refer to CSI MasterFormatTM for other section numbers and titles. SECTION 061733 - WOOD I-JOISTS GENERAL SUMMARY Specifier Note: Revise paragraph below to suit project requirements. Add section numbers and titles per CSI MasterFormat and specifiers practice. Related Sections: Permanent Bridging and Bracing, Headers and Supports to Frame Openings, and Sheathing: Division 06 carpentry sections. Framing Connectors and Hangers: Division 06 carpentry sections. Specifier Note: Article below may be omitted when specifying manufacturers proprietary products and recommended installation. Retain Reference Article when specifying products and installation by an industry reference standard. If retained, list standard(s) referenced in this s