5-1FLUENT流体模拟-UDF-答辩.ppt

* DEFINE_GEOM介绍 用来定义变形区域的几何形状，变形区域的节点在移动后投影到此几何图上 目的：保证移动后的变形区域上的节点始终都在所规定的几何形状上 * DEFINE_GEOM介绍 算例： * DEFINE_GRID_MOTION介绍 用来移动任意边界和流体区域内的网格节点 使用此UDF时，每一个时间步都必须执行 算例： * * * 算例： DEFINE_GRID_MOTION介绍 谢谢！ This slide takes a birds-eye-view of the FLUENT solvers. The solution procedure begins with initialization, following which an iteration loop is opened. For keeping things simple, we are considering only steady state analysis procedure here. Within the loop we solve the conservation equations for mass, momentum and energy either as coupled or in sequence based on the choice of the solver. Other scalar equations like turbulence, species and user-defined-scalars are solved sequentially after the basic flow equations. We then update boundary conditions, properties based on the recent solution Next the state of convergence is checked and a decision is made whether or not to continue through the iteration loop. Now, for users to customize the code, we needed to design ‘access-point’s for the user. Those are shown in blue boxes. These are: The user can initialize the fields his way; Can take control at the top of the iteration loop for making some special computation; Can add source terms to all equations; Can defined most properties with custom functions; Can prescribe special boundary conditions. And what are not shown here are that the user can make model specific changes - for example, can modify convective flux function for scalars, various multiphase functions, modify turbulent viscosity or even time steps in unsteady analysis. * * * Explain for simple problems interpreted codes is the way to go. Does not require Makefiles. However, handles only a subset of the C language. It is not necessary and you should not go into a detailed description on each of the above DEFINE macros. Pick a couple and describe what they are used for. Don’t discuss all in detail. Don’t discuss all in detail. Don’t discuss all in detail. The setup for UDS are summarized in these two slides