solution C TOUCH PAD JOY STICK.pptVIP

Touch Pad Perform as Game Stick The touch pad can switch between mouse mode and game stick mode via application program. The touch pad surface is separated to 2-6 area and defined different function. The touch pad detect the tow kind of motion in the same area: A click and B slide a little distance toward a certain direction. Then judge the motion and area to send signal of direction key、function key 、variance change and joy stick. A. Click: the finger pointing the lift without sliding, The touch pad send signal of function key according the touched area. B slide a little distance toward a certain direction. The touch pad compare the primary contact position (X1,Y1) and the second time position (X2,Y2)；calculation the direction and distance, then send signal of direction key、function key 、variance change and joy stick according the function defined accord to area. The touch pad can send more than two kind of signal at the same area by the above method. No need to separate to so many area for each keys. The benefit of this design as follows. 1.Detect the two kind of motion: click and sliding, so that can send different signal by touch the same position. Separate different area on touch pad and define function each, so can simulate all the motion of game stick. ?The touch pad can send more than two kind of signal at the same position. No need to separate to so many area for each keys. And may not arrange too much keys on surface for preventing mistake. 2. Can simulate many kinds of game equipment such as game stick, airplane handle, car handle wheel. 3. Can use different finger to prevent tired. 4. More easy to use than keyboard. Ex. direction key by sliding toward direction, increase/decrease speed by scroll. No need to remember too much keys. 5. Can use couple with keyboard. Some function operation by keyboard according to user habit. ? The method of realization T