一种铣削组合机床及主轴箱设计大学学位论文.doc

摘 要 组合机床是以通用部件为基础，配以按工件特定形状和加工工艺设计的专用部件和夹具，组成的半自动或自动专用机床。工序集中，Abstract Combination machine tools based on general parts, according to the specific shape of the part and process design of special components and fixture, composed of dedicated semi-automatic and automatic machine tools. Has the following advantages: compact structure, can reduce cover an area of an area, is advantageous to the implementation process, the quality of the work is more reliable, at the same time because can shorten the design and manufacturing cycle, so can reduce the investment, and therefore can obtain a higher economic efficiency, improve the productivity, etc. The topic of this design is a combination of milling machine and spindle box design. In order to realize the process, improve the efficiency of production and processing, improve the machining accuracy. To complete the design, a large number of literatures, the main design process, refer to the manual design and others for this design. To complete the paper in the process, from the target parts of the processing required, determine the design needed to meet the requirements of the precision of the size, and an overall design plan of nc machine tools for machining parts. About design thinking process of the design as follows: first of all, according to the requirements as well as a variety of specifications, determine the general layout of machine tool, makes every effort to reasonable layout and compact; Then further refine the structure design of spindle box design. In the process of the design of spindle box, need, from the perspective of the main shaft, in satisfies the requirement of stiffness, precision, etc, to achieve its function structure, complete design of other relevant parts. The preliminary design to complete a combination of milling machine and spindle box design. Completed the overall scheme selection and determine; Zero component design and selection; Draw the overall scheme system diagram and the plan. And t