BM192-MBEB-CE 规格书.pdfVIP

BYD Microelectronics Co., Ltd. BM192-MBEB-CE One-Cell Li Battery Protectors Datasheet WI-D06-J-0062 Rev.A/1 Page 1 of 11 General Description The BM192-MBEB-CE is protector for lithium-ion and lithium polymer rechargeable battery with high accuracy voltage detection. It can be used for protecting single cell lithium-ion or/and lithium polymer battery packs from overcharge, overdischarge, over current and short circuit. The IC has suitable protection delay functions and low power consumption property. Applications Typical Application Circuits BM192-MBEB VDD VSS S2 S1 VM C1 0.1uF R1 470? B+ B- CELL C2 0.1uF P- R2 2.7K? P+ Features Overcharge Detection Voltage 4.300V Accuracy ±50mV (Ta=25℃) Overdischarge Detection Voltage 2.400V Accuracy ±100mV (Ta=25℃) Discharge Overcurrent Detection Voltage 0.150V (VDD = 3.300V) Accuracy ±30mV (Ta=25℃) Short Circuit Detection Voltage Typ. 1.350V (VDD = 3.300V) Accuracy ±350mV (Ta=25℃) Low Current Consumption Standard working current Typ. 3.0uA (VDD = 3.900V, Ta=25℃) With auto wake up Typ. 1.6uA (VDD = 2.000V, Ta=25℃) Auto Wake up function is allowed Small Package DFNWB2.2*2.9-6L FET general characteristics VDS=20V RSS(ON)55 m? (VGS=3.8V,ID=1A) Notes R1 and C1 are to stabilize the supply voltage of the BM192-MBEB-CE. R1 C1 is hence regarded as the time constant for VDD pin. R1 and R2 can also be a part of current limit circuit for the BM192-MBEB-CE. Recommended values of these elements are as follows: R1＜1K?. A larger value of R1 results in higher detection voltage, introducing errors. 1.5k?＜R2＜4K?. A larger value of R2 possibly prevents resetting from Overdischarge even with a charger. R1+ R2＞1.6K?. Smaller values may lead to power consumption over the maximum dissipation rating