FS41_FS41Y_G1 V11.pdf

FS41 FS41Y Single Hall Effect Latch This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sales of the product. Rev1.1 Apr. 20, 2010 P.1 FEELING TECHNOLOGY Features
Wide operating voltage range: 3.0V to 28V
Maximum output sink current 50mA
Open-Collector pre-driver
Power reverse polarity protection
Available in SIP-3L,SOT-23(FS41Y) package General Description The FS41/FS41Y is an integrated Hall effect latched sensor designed for electronic commutation of brush-less DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and open-collector output. An internal bandgap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. A north pole of sufficient strength will turn the output ON. In the absence of a magnetic field, the output is OFF. Block Diagram Figure.1 Vdd Regulator Hall Sensor 1 2 3 Gnd Output Halogen Free FS41 FS41Y Rev1.1 Apr. 20, 2010 P.2 FEELING TECHNOLOGY Pin Connection Figure.2 Pin Descriptions Name I/O FS41 FS41Y Description VDD P 1 1 Positive power supply VSS G 2 3 Ground VOUT O 3 2 Driver output Legend: I=input, O=output, I/O=input/output, P=power supply, G=ground Functional Application Circuit Figure.3 VO UTVSSVD D 1 2 3 M ark S ide FS 41Y FS 41 V O U T V S S V D D Top V iew 3 1 2 M M : 3 Phase DC Motor : Hall Effect Sensor DC Motor Driver HA HB HC Ic Ib Ia IC IB IA Motor Driver Control Logic FS41 FS41Y Rev1.1 Apr. 20, 2010 P.3 FEELING TECHNOLOGY 0 2