RocketDish_RD-5G30_QSG.pdf

airMAX? Carrier Class 2x2 PtP Bridge Dish Antenna Model: RD-5G30 1Introduction Introduction Thank you for purchasing the Ubiquiti Networks RocketDish?, an airMAX? Carrier Class 2x2 PtP Bridge Dish Antenna, model: RD-5G30. This Quick Start Guide is designed to walk you through the installation of the RocketDish. Package Contents Dish Reflector Antenna Feed Main Mounting Bracket Carrier Class airMAX? Carrier Class 2x2 PtP Bridge Dish Antenna Model: RD-5G30 Protective Shroud Quick Start Guide Pole Clamps (Qty. 2) Stabilizer Brackets (Qty. 2) RF Cables (Qty. 2) M16 Elevation Rod with Nut and Lock Washer Assembly M10x150 Carriage Bolts with Nut and Lock Washer Assemblies (Qty. 4) M10x100 Bolts with Nut and Lock Washer Assemblies (Qty. 2) M10x25 Carriage Bolts with Nut and Lock Washer Assemblies (Qty. 3) M4 Bolts with Lock Washer Assemblies (Qty. 4) * Products may be different from pictures and are subject to change without notice. 2RocketDish? RD-5G30 Quick Start Guide Installation Requirements ? RocketM5 or RocketM5 GPS (sold separately) ? Phillips #1 screwdriver ? 16 mm or 5/8 in. wrench ? 24 mm wrench ? Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial-grade shielded Ethernet cable from Ubiquiti Networks?. For more details, visit /toughcable Hardware Overview Fully Assembled Back View Elevation Rod Main Mounting Bracket Pole Clamp Pole Clamp Protective Shroud Stabilizer Brackets 3Hardware Installation Hardware Installation Important: Handle the Dish Reflector with care. Deformations in its shape may reduce the RocketDishs effectiveness. 1. The Dish Reflector and Antenna Feed are keyed so the Antenna Feed can only be installed in a single orientation. Attach the Antenna Feed to the Dish Reflector in the following ste