TI MSP-EXPG LaunchPad开发解决方案.docxVIP

TI MSP－EXP430G2 LaunchPad开发解决方案 关键字：工业控制,手持测试仪表,传感器系统 TI公司的MSP430F15x/16x/161x系列是超低功耗微控制器,集成了两个16位计时器,快速12位ADC,双路12位DAC,一个或两个USART,I2C,DMA和48个I/O引脚.工作电压1.8 V - 3.6 V, 1 MHz和2.2 V是的功耗仅330 μA,五种降功耗模式,典型应用包括传感器系统,工业控制和手持仪表等.本文介绍了MSP430F161x 主要特性,方框图以及MSP-EXP430G2 LaunchPad低成本实验板主要特性,电路图,材料清单和PCB元件布局图.MSP430F15x, MSP430F16x, MSP430F161x MIXED SIGNAL MICROCONTROLLERThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 μs.The MSP430F15x/16x/161x series are microcontroller configurations with two built-in 16-bit timers,a fast 12-bit A/D converter, dual 12-bit D/A converter, one or two universal serial synchronous/asynchronous communication interfaces (USART), I2C, DMA, and 48 I/O pins. In addition, the MSP430F161x series offers extended RAM addressing for memory-intensive applications and large C-stack requirements.Typical applications include sensor systems, industrial control applications, hand-held meters, etc.MSP430F161x 主要特性:Low Supply-Voltage Range: 1.8 V to 3.6 VUltralow Power Consumption? Active Mode: 330 μA at 1 MHz, 2.2 V? Standby Mode: 1.1 μAOff Mode (RAM Retention): 0.2 μAFive Power-Saving ModesWake-Up From Standby Mode in Less Than 6 μs16-Bit RISC Architecture,125-ns Instruction Cycle TimeThree-Channel Internal DMA12-Bit Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, and Autoscan FeatureDual 12-Bit Digital-to-Analog (D/A) Converters With Synchronization16-Bit Timer_A With Three Capture/Compare Registers16-