AX1007-V1.5.pdf

1/11 Axelite Confidential Materials, do not copy or distribute without written consent. Rev.1.5 Dec.13, 2010 AX1007 1A Low Dropout Linear Regulator ? GENERAL DESCRIPTION AX1007 is a low dropout positive adjustable or fixed-mode regulator with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. AX1007 is also well suited for other applications such as VGA cards. AX1007 is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with VOUT+1.4V to 12V input supply VOLTAGE. ? FEATURES - 1.4V maximum dropout at full load current - Fast transient response - Output current limiting - Built-in thermal shutdown - Good noise rejection - MLCC Capacitors are available. - 3-Terminal Adjustable or Fixed 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V - Packages: SOT223, TO252 and SOT89. ? APPLICATION CIRCUIT Fixed Output ADJ Output VIN=5V VOUT =3.3V C2 0.2uF AX1007-33 1 2 3 GND VOUT VIN C1 0.1uF VIN=5V VOUT =3.3V C2 0.2uF AX1007-ADJ 1 2 3 ADJ VOUT VIN C1 0.1uF R1 240 R2 390 VV R RVV REFREFOUT 250.1);1 21( ???? 2/11 Axelite Confidential Materials, do not copy or distribute without written consent. Rev.1.5 Dec.13, 2010 AX1007 ? PIN ASSIGNMENT The packages of AX1007 are SOT223-3L, TO252-3L and SOT89-3L; the pin assignment is given by: VIN VOUT Adj (GND) Tab is Vout ( Top View ) 3 2 1 SOT223 TO252 3 2 1 VIN VOUT Adj (GND) Tab is Vout ( Top View ) Name Description Adj (GND) A resistor divider from this pin to the VOUT pin and ground sets the output voltage. (Ground only for Fixed-Mode) VOUT The output of the regulator. (Note1,2) VIN The input pi