bloom 烧嘴1070 11-09.pdf

1070 SERIES ULTRA LOW NOXTM HOT OR COLD AIR BAFFLE BURNER CAPABILITIES High release rates with moderate air Good turndown with flame characteristics and direction maintained Stable flames can be from highly oxidizing for tempered flame operation to highly reducing for maintaining atmospheres FEATURES APPLICATIONS Rugged fabricated construction Patented low NOx refractory baffle stabilization shields the burner internals from flame and it is a self supporting stable structure Suitable for operation at furnace temperature up to 2600°F (1427°C) Heat resistant alloy nozzle Provisions for flame monitoring Pilot or air assisted spark ignition available CONTROL Volumetric fuel to air ratio control recommended. FLAME MONITORING U.V. Detector Please contact your Bloom Representative for flame monitoring with residual oils Slab Reheating Furnaces Ladle Dryers Billet Reheating Furnaces Ingot Heaters Air Heaters Hot Metal Mixer Boilers Copper and Aluminum Reverberatory Furnaces and many other applications BURNER IGNITION Pilot Manual FUEL CAPABILITIES Natural Gas ** LP Gas Coke Oven Gas * #2 Oil through #6 Oil and Tar Many other Applications The Bloom 1070 Series refractory baffle burner is designed for gaseous and liquid fuels and it suitable, without change, for any gas having a heating value of approximately 500 Btu per cubic foot or greater. For designs burning lower heating value gases, contact your local representative or Bloom Pittsburgh. * The Bloom baffle burner will operate equally as well on most oils. For distillate fuel oils, the burner is available with the 1800 FET Series atomizer. The 1800 FET series atomizer can be supplied with a retractable design, which permits operation on gas with oil burner in place or retracted. ** Turndown lance may be required. CAUTION: The improper use of combustion equipment can result in a conditi