bloom 烧嘴1150 11-09.pdf

1150 SERIES ULTRA3 LOW NOXTM LUMIFLAME REGENERATIVE BURNER APPLICATIONS Continuous and Batch Reheating Furnaces Non-ferrous Melting and Holding Furnaces Aluminum Melters and Holders Forge Furnaces Glass Melters Heat Treating Furnaces Ladle Heaters Many others CAPABILITIES World leading low NOX technology Reduced carbon dioxide emissions Increased production from existing furnaces Excellent turndown Custom engineered for the application High heat release rates with moderate air pressure Stable operation with high excess air through ratio firing Stable operation in regenerative mode at any operating temperature Low NOX operation regardless of furnace temperature Luminous, well formed and directed flame The 1150 Series LumiFlame Regenerative Burner is the most advanced development in low NOX combustion technology and fuel efficiency. High fuel efficiency is achieved through regeneration using a pair of burners which cycle to alternately heat the combustion air or recover and store the heat from the furnace exhaust gases. When one burner is firing, the other is exhausting the furnace gases. Exhaust gases pass through the burner body and into a media case, which contains refractory material. The refractory media is heated by the exhaust gases, thus recovering and storing energy from the flue products. When the media bed is fully heated, the burner currently firing is turned off and begins to exhaust the flue products. The burner with the hot media bed begins firing. Combustion air passes through the media bed and is heated by the hot refractory. Air preheat temperatures within 300°F (149°C) of the products of combustion are achieved resulting in exceptionally high thermal efficiency. MANUFACTURED UNDER U.S. PATENT NO. 5,180,300 CAUTION: The improper use of combustion equipment can result in a condition hazardous to people and property. Users are urged to comply wi