DF52_catalog-939321.pdf

12016.5 ■Features 1. Small-sized connector 0.8mm Pitch, 1.75mm Height, 4.1mm Depth. Suitable for small-sized applications. 2. Small but robust structure The housing is designed with thick walls while remaining small. This produces a strong, robust connector that resists damage. 3. Suitable for high current applications. The maximum current of 2.5A (using 2-pos 28 AWG wire) is achieved by using highly conductive material and appropriate contact force. 4. BOX shaped contact prevents deformation. The BOX shaped crimp contact prevents deformation during assembly and contributes to the overall stability and robustness. 5. Visual check insures fully mated Plug and Receptacle The housing is designed with an open side that allows for visual inspection to insure the connectors are fully mated preventing accidental disconnect. 6. Glow Wire compliance (Compliant with IEC 60695-2-11) 7. Halogen-free Chlorine and bromine levels are below standard values of IEC 61249-2-21. Br : less than 900ppm, Cl : less than 900ppm, Br + Cl : less than 1,500ppm. ◆Box shaped contact structure ◆Allows for visual inspection of the mating process. Housing walls are thick while the connector remains small. Robust structure prevents damage while routing wiring. The Box shaped structure of the crimp contact prevents deformation. The mated condition can be visually checked. Board side Incomplete mating Cable side Mating complete Thick wall parts Thick wall parts The contact is exposed in the half-mated state. Mating is complete when the contact is no longer visible. Exposed contact 0.8mm Pitch, Compact and Robust Wire-to-Board Connectors DF52 Series ◆Small and robust structure Fig.1 Fig.2 Fig.3 J u l. 1 .2 0 1 6 C o p y r ig h t 2 0 1 6 H IR O S E E L E C T R IC C O ., L T D . A ll R ig h ts R e s e r v e d . ■Product Specifications Ratings Current Rating No. of contacts 2 3 to 5 6 to 10 12 or more Operating temperature range : -40 to 85℃ (Note 1) Operating humi