LTE eMTC 协议介绍.docxVIP

eMTC IntroductionBL/CE: Bandwidth-reduced Low-complexity and Coverage Enhanced,R13中对CAT.M(eMTC) UE的代称；1物联网几个标准的对比3GPP物联网标准包括：Cat. 1 ：R8就已经发布Cat. 0(MTC) ：R12发布Cat. M(eMTC)：R13发布NB-IOT：R13与eMTC同版本发布Cost reduction CAT.0 和CAT.M的数据有效带宽是相同的(都是6个RB带宽)，在36.306协议中定义的一个子帧内上下行最大传输数据量也是相同的。但是CAT.0是按照小区带宽来接收的，因此收发过程中不需要接收发送频点的retuning。CAT.0是一个过渡协议，是在CAT.M没有release的时候的过渡标准。Table 4.1A-1: Downlink physical layer parameter values set by the field ue-CategoryDLUE DL CategoryMaximum number of DL-SCH transport block bits received within a TTI (Note 1)Maximum number of bits of a DL-SCH transport block received within a TTITotal number of soft channel bitsMaximum number of supported layers for spatial multiplexing in DLDL Category M110001000253441DL Category 0 (Note 2)10001000253441Category 110296102962503681Table 4.1A-2: Uplink physical layer parameter values set by the field ue-CategoryULUE UL CategoryMaximum number of UL-SCH transport block bits transmitted within a TTIMaximum number of bits of an UL-SCH transport block transmitted within a TTISupport for 64QAM in ULUL Category M110001000NoUL Category 010001000NoCategory 151605160NoeMTC可以支持VoLTE，NB-IOT不能支持。eMTC支持切换重选等移动性需求，NB-IOT不支持(后续可能增强支持)。物理层参数对比eMTC Vs NB-Iot Vs Legacy LTE?LTE R9NB-IoTCat.M系统带宽1.4M/3M/5M/10M/15M/20M200kHz1.4M工作模式full duplex FDD or TDDhalf-duplex FDD(typeB) half-duplex or full-duplex, FDD or TDD最大传输速率DL: 150Mbps; UL 50MbpsDL/UL: ～60 kbps/～50kbpsDL/UL: 1Mbps频带部署方式LTE授权频段带内，带外，保护带三种部署方式LTE授权频段覆盖范围(MCL)(REF:3GPP36.888)FDD: PRACH(142dB); PUSCH(141dB)PDSCH(145dB); PBCH(149dB)Suppose cat.1 UE at data rate of 20kbps164dB for standalone, FFS others目标是相比于R9中MCL最小的信道提升15dB的覆盖，差不多要求所有信道的MCL达到155dB子载波间隔DL/UL: 15kHzDL: 15kHz, UL: 15kHz or 3.75kHz与R9相同传输模式TM1-TM9TM1/TM2 (单天线或双天线发送分集)CEModeA: TM1/TM2/TM6/TM9;CEModeB: TM1/TM2/TM9单天线或双天线发射分集，TM6可以支持单layer的CLSM同步信号PSS/SSSNPSS/NSSS，构造以及相对间隔都与R9 PSS/SSS不同与R9相同系统信息MIB重新设计的NPBCH，占用整个子帧基本沿用R9的MIB，只是每个OS分别增加3~5次重传SIB1, SI-RNTI加扰的PDCCH单独的SIB1-NB，调度和MCS都在MIB-NB中获得，没有SI-RNTI，不需要接