ANSYSCFX12礎训练课程2.pptVIP

Introduction to Workbenchand CFX Workflow;The Workbench Environment;The Toolbox;The Toolbox;The Project Schematic;The Project Schematic;The Project Schematic;The Project Schematic;The Project Schematic;The Project Schematic;The Project Schematic;Optional Workbench Windows;Workbench File Management;Workbench File Management;Workbench File Management;Starting CFX;Try It Yourself!;Running Standalone vs Workbench;Running Standalone vs Workbench;CFX 分析的步驟;I. 幾何、拓樸及網格;定義流體計算域 產生流體區 (流體、固體、傳導固體、 多孔性介質) 給定流體性質 (黏滯係數、 熱傳導係數、比熱等等) 選定物理模組 (紊流模型、 可壓縮性、浮力、兩相流等等) 定義邊界條件 於幾何外在表面定義邊界條件 定義求解器參數且設定所需的匯出資料;CFX-Pre GUI;III. 求解過程;IV: 後處理;Setting the Working Directory;CFD-Post;Outline Tree;To define your simulation, generally follow the Outline tree from top to bottom Double-click entries in the Outline tree to edit Right-click on entries in the Outline tree to insert new items or perform operations Some items are optional, depending on your simulation;CFX-Pre – Workflow;CFX-Pre – Workflow;Useful Shortcuts;Load Mesh Right-click on Mesh;Define Domain Properties Right-click on the domain and pick Edit Or right-click on Flow Analysis 1 to insert a new domain;Create Boundary Conditions for a Domain Right-click on the domain to insert BC’s;Define Solver Settings Right-click on Solver Control and pick Edit;CFX-Pre – Workflow Example;Defining a Run CFX-Pre will have written a .def file and this is automatically selected as the Solver Input File Can enable Initial Values check box if you have a previous solution to use as the starting point Parallel settings are defined here Allows you to divide a large CFD problem so that it can run on more than one processor/machine Start Run!;CFX-Solver Manager;CFX-Solver Manager;Outline Tree;General Workflow Prepare locations where data will be extracted from or plots generated E.g. Planes, Isosurface Create variables/expressions which will be used to extract data (if necessary) E.g. drag, pressure ratio;CFD-Post;Summary of Common File Types;Summary of C