基于变形余裕度的冲压板材成形选择评价研究.pdfVIP

第 32 卷 第 2 期 2007 年 4 月 VoI. 32 No. 2 FORGING STAMPING TECHNOLOGY Apr. 2007 板料成形 基于变形余裕度的冲压板材成形选择评价研究 刘占军* （沈阳航空工业学院 航空宇航工程学院，辽宁 沈阳 110034） 摘要：基于变形余裕度的冲压板材成形选择理论，给出变形余裕度的冲压板材成形选择过程。研究了变形余裕度的 冲压板材成形选择评价方法，并以某汽车后轮罩拉深件为例，对其长边直壁部分进行变形余裕度和平面应变破裂 评价，绘出其伸长变形分布和应力分布图。结合板材应变目标样本，给出了具体实例破裂力的实验值与理论值比较 结果。 关键词：变形余裕度；破裂评价；冲压板材；伸长变形 中图分类号：TG386 文献标识码：A 文章编号：1000-3940（2007）02-0022-04 Research on choice evaluation of sheet cutting shape based on deforming ample degree LIU Zhan-jun （CoIIege of Aerospace Engineering，Shenyang Institute of AeronauticaI Engineering，Shenyang 110034，China） Abstract：According to the choice theory of sheet cutting shape based on deforming ampIe degree，the choice process of sheet cutting shape based on deforming ampIe degree was given. The choice evaIuation of sheet cutting shape based on deforming ampIe degree was studied . The pIane strain cracking and deforming ampIe degree showed on the Iong side straight-waII were evaIuated，using one truck back-wheeI cover drawing as an exampIe. Distribution of eIongation transform and stress was giv- en. Combined with the goaI specimen of sheet strain，compared vaIues of experiment and theory for the given exampIes crack- ing force were presented. Keywords：deforming ampIe degree；cracking evaIuation；sheet cutting；eIongation transform *男，39 岁，硕士，副教授 收稿日期：2006-03-28；修订日期：2006-07-27 面的影响是显而易见的。 及由此带来的变形问题。 以拉杆固定支架为例，切边时存在残留毛刺、 3. 6 冷却 表面压伤、弯曲变形等诸多缺陷。