实验报告正文——王建实验报告正文——王建.doc

PAGE \* MERGEFORMAT14 摘要：本实验是基于Quartus = 2 \* ROMAN II软件以及SmartSOPC实验开发系统的多功能数字时钟的设计。首先对多功能数字时钟所需实现的各个功能进行分析，然后对实现各功能的基础电路进行设计，结合基本功能模块，设计总体方案。该多功能数字时钟主要包含了时钟电路，分频电路，报时电路，校时校分电路以及消颤电路等基本电路。经Quartus = 2 \* ROMAN II软件的设计和仿真，最终在SmartSOPC实验平台上实现了基本时钟显示、保持、清零，时间校正，整点报时，闹钟等功能。 关键字：多功能 数字时钟 Quartus = 2 \* ROMAN II SmartSOPC Abstract：The experiment is about a design of a multifunctional digital clock based on Quartus = 2 \* ROMAN II and SmartSOPC.Firstly, the required functions of the clock are analysed, then, the fundamental circuits to realize the functions are designed. The whole design is achieved based on the fundamental functional modules. The all circuits to achieve the functions of the clock include timer, frequency divider, chime on integral time, recalibrate time and so on. After the design and simulation in the Quartus = 2 \* ROMAN II software, the functions of time displaying, keeping, clearing, recalibrating striking the hour and alarm clock are all achieved on the platform of SmartSOPC. Keywords: multifunctional digital clock Quartus = 2 \* ROMAN II SmartSOPC 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc451500421 1 实验设计内容  PAGEREF _Toc451500421 \h 3  HYPERLINK \l _Toc451500422 2 设计要求  PAGEREF _Toc451500422 \h 3  HYPERLINK \l _Toc451500423 3 总体方案  PAGEREF _Toc451500423 \h 3  HYPERLINK \l _Toc451500424 4 模块设计  PAGEREF _Toc451500424 \h 3  HYPERLINK \l _Toc451500425 4.1 分频电路模块  PAGEREF _Toc451500425 \h 3  HYPERLINK \l _Toc451500426 4.2 时分秒计时电路模块  PAGEREF _Toc451500426 \h 6  HYPERLINK \l _Toc451500427 4.3 报时电路模块  PAGEREF _Toc451500427 \h 8  HYPERLINK \l _Toc451500428 4.4 校时校分电路模块  PAGEREF _Toc451500428 \h 8  HYPERLINK \l _Toc451500429 4.5消颤电路模块  PAGEREF _Toc451500429 \h 9  HYPERLINK \l _Toc451500430 4.6译码显示电路模块  PAGEREF _Toc451500430 \h 9  HYPERLINK \l _Toc451500431 4.7 整体封装图  PAGEREF _Toc451500431 \h 10  HYPERLINK \l _Toc451500432 5 程序下载，仿真与调试  PAGEREF _Toc45150043