论文40论文41-矿车变频牵引控制系统.doc

 PAGE \* MERGEFORMAT 96 (此文档为word格式，下载后您可任意编辑修改！) 摘 要 本设计主要完成矿车变频牵引控制系统的PLC系统设计和组态设计。PLC系统采用施耐德公司的Quantum系列作为主控制器，完成对电动机、变频器等被控对象的控制，可以实现对矿车的监控，同时为了保证系统的可行性采用远程IO。能够实现上位监控功能。使用编程软件完成许多控制功能让车前进、后退等等。 PLC程序设计借助于Concept软件中的仿真器，不需要使用实际硬件，即可对程序功能进行测试，可以减少现场调试的工作量。 关键词：矿车牵引；PLC；变频器; Abstract This design mainly completes design the PLC system and configuration of the frequency converter control system of the mineral car. The PLC system takes Quantum series of adopting which produced by Schneider as the master controller, finishes the target of control the motor, frequency converter, etc. and realizes the control to the machine of the mineral car. At the same time, it takes the long range IO The configuration is designed and finished under the environment of kingview and can realize such functions as computer’s supervise and control, etc. The usage software completes many control functions to let the mineral car go forward, retreat...etc. Depending on the artificial device in concept software we do not need to use the real test the function of the procedure and reduce the debug in the field. Keyword: Mineral car traction;PLC; Frequency converter; 目录  TOC \o 1-3 \h \z \u 第一章变频器火车牵引概述  PAGEREF _Toc169938478 \h 1 1.1变频牵引的背景  PAGEREF _Toc169938479 \h 1 1.2本次毕业设计要求  PAGEREF _Toc169938480 \h 1 1.2.1内容  PAGEREF _Toc169938481 \h 1 1.2.2功能  PAGEREF _Toc169938482 \h 2 第二章 系统概述  PAGEREF _Toc169938483 \h 3 2.1 方案论证  PAGEREF _Toc169938484 \h 3 2.1.1 IO 连接方式的选择  PAGEREF _Toc169938485 \h 3 2.1.2PLC控制网的选择  PAGEREF _Toc169938486 \h 4 2.1.3矿车装料过程控制方案的选择  PAGEREF _Toc169938487 \h 4 2.1.4 单、双缆的选择  PAGEREF _Toc169938488 \h 6 2.1.5 变频器控制方式的选择  PAGEREF _Toc169938489 \h 6 2.2 系统组成  PAGEREF _Toc169938490 \h 6 2.2.1 PLC系统  PAGEREF _Toc169938491 \h 6 2.2.2 计算机监控系统  PAGEREF _Toc169938492 \h 7 第三章硬件设计  PAGEREF _Toc169938493 \h 8 3.1轨道开关设计  PAGEREF _Toc169938494 \h