汽车过滤器模具设计毕设论文.docVIP

 PAGE \* MERGEFORMAT II (此文档为word格式，下载后您可任意编辑修改！) 摘要 塑料制品的广泛应用推进了注塑行业的发展，作为塑料成型的一种重要工具，注塑模具的设计将会直接关系到塑件的质量和性能。本文概述了注塑模具的重要地位和作用；总结了计算机技术在模具设计和制造中的应用。运用计算机辅助设计(CAD)和分析(CAE)对发电机组滤清器外壳进行了注塑成型过程的模拟分析和工艺及模具的设计：包括对滤清器外壳的成型工艺性分析；运用Moldflow软件模拟充填、流动和冷却过程，预测成型过程中可能的缺陷并进行了优化；对注塑模具各个部分进行了设计，其中包括针对较复杂结构所设计的侧抽芯和斜顶机构；使用UG和CAXA电子图板软件完成了对装配模具和主要零件的三维造型与二维图纸的绘制；最后以型腔为例说明了注塑模具中典型成型零件的加工制造规程。 关键词 注塑成型工艺；模具设计；数值模拟；发电机组滤清器外壳 ABSTRACT The development of the injection molding industry promoted by the wide use of plastic products. As an important tool of plastic molding, the design of injection molds the quality and performance of plastic parts. The important status and role of injection molds were briefly introduced in this paper. The application of computer technology in mold design and manufacturing is summarized. The simulation of molding processes and the design of the mold structure for a filter shell are done by the method of Computer Aided Design (CAD) and Engineering (CAE). The following tasks are accomplished: Analyzing the molding manufacturability of the filter shell; Simulating the filling, flowing and cooling process using Moldflow，Forecasting and optimizing the possible defects in injection molding process; Analyzing and designing every part of injection mold, especially the design of side core-pulling and lifter body mechanism for complex structure; Completing the 3D modeling and 2d drawings of mold assembly and the main components using UG and CAXA electronic board; Illustrating manufacturing procedures of the typical molding parts in injection mold taking the cavity for example. Keywords: Injection molding process; Mold design; Process simulation; Filter shell  PAGE \* MERGEFORMAT 3 目录 TOC \o 1-3 \h \u 摘要  PAGEREF _Toc18135 I ABSTRACT  PAGEREF _Toc23761 II 第1章 绪论  PAGEREF _Toc24165 1 1.1 注塑模具的重要地位和作用  PAGEREF _Toc4622 1 1.2 计算机技术在模具设计和制造中的应用  PAGEREF _Toc1304 1 1.3 课题的主要内容  PAGEREF _Toc7262 2 第2章 塑件成型的工艺性分析  PAGEREF _Toc30222 5 2