安全卡盘扳手设计与应用.pdfVIP

2012 年 1 月 机床与液压 Jan. 2012 第 40 巷第 2 期 MACHINE TOOL HYDRAUUCS VoL 40 No.2 001: 10. 3969/j. issn. 1 佣 1 - 3881. 2012. 02. ∞9 安全卡盘扳手设计与应用 罗太景，裴武兴 (徐州工业职业技术学院，江苏徐州 221140) 摘要:车床的操作中最常用到的扳手有两副，一副是卡盘扳手，另一副是刀架方头螺钉扳手。两副扳手各有所用，不 能够替换，在操作中频繁更换，影响工作效率;同时，有人使用卡盘扳手夹紧工件后可能忘记将其取下，就有可能发生伤 人事故，存在严重的安全隐患。针对以上不足，设计出一种新型的安全卡盘扳手，集卡盘扳手和刀架扳手的功能于一身， 既减轻了劳动强度，提高了劳动效率，又杜绝了安全隐患，具有较好的经济效益和社会效益。 关键词:车床;卡盘:安全;多功能扳手 中图分类号:咀-1 122; TG712 文献标识码 :B 文章编号: 1 ∞ 1 -3881 (2012) 2 -022-5 Safe Chuck Wrenchs Design and Application LUO Taijing, PEI Wuxing (Xuzhou College of Industrial Technology, Xuzhou Jiangsu 221140 , China) Abs优act: The most commonly used spanner h酷 two in lathes operation. One is the chuck wrench , another is tω，} rest 呻皿t head screw spanner. Each spanner has its own us吨;e ，由d can not be replaced by 0由er. During operation ，由ey are frequenùy re? placed ，回 working efficiency is affected. At 由e 盹me time , some one might use a chuck wrench to tighten a workpiece , and forget 10 take it down afterwards ， ωit might cause personal i 对町 and severe safe hidden danger exists. Aiming at the deficie町嘟ve ， one kind of new multipurpose s优urity sp缸merwωdesigned ， which inte萨ated functions of the two spωners in one - body. 币le labor inten? sity ís reduced and efficiency is raised by this new spanner. Most importanùy , safe hidden danger is c创sed. lt has great economic and social efficiency. Keywords: Lathe; Chuck; Safe; Multipurpose spanner 一般工厂机床加工生产中，最常用的机床扳手就 发生，伤及人身或损坏机床。 是卡盘扳手和刀架扳手。操作者通过卡盘扳手将工件