Implant biomechanics research.docVIP

 PAGE \* MERGEFORMAT 13 Implant biomechanics research Dental implant biomechanical compatibility is a successful dental implant is an important aspect can not be overlooked, too large or too small, the stress can cause periodontal or contraction of the absorption of bone tissue, leading to implant failure. In this paper, implant material, implant shape structure, implant length and diameter of the implant and the superstructure of the connection and other factors on the stress distribution of the impact of the recent years, dental implant biomechanics research briefly reviewed. Dental implant denture is the fastest growing areas, the most exciting one branch has become a high-speed turbine dental machine, panoramic X-ray machine, polymer cement material parallel to the 20th century, a major breakthrough in dental development in four of the 1. A successful artificial implant and bone tissue should be directly integrated to form a good biomechanical compatibility, will chew the pressure evenly distributed into the surrounding bone tissue, the stress is too large or too small, are not conducive to cultivation of periodontal bone tissue reconstruction, would lead to implant failure. Accordingly, this special will implant biomechanics research are summarized below. A stress distribution in the development of research methods In the 20th century, 70 years ago, bio-mechanics research and detection of stress distribution in multi-use electrical measuring method and photoelastic method, electrical measuring method and photoelastic stress analysis method of an experimental method. Electrical measurement method is a method of experimental stress analysis, one of the most basic ways, and its high sensitivity and accuracy can be used for on-site determination for a variety of complex environments a variety of mechanical parameters measured, but only by electrical measurement method point strain measurement of the object’s surface, and the only access to the location of