45°LockMiterBitsInstructions45°LockMiterBits.pdf

45° Lock Miter Bits Instructions 45° Lock Miter Bits 16J75.08/18J75.08 16J75.62/18J75.62 For better safety, use this bit only on a router table with a fence – not free hand. The lock miter joint is an improvement over standard miter joints in box construction. The interlocking joint guarantees an accurate fi t and the increased gluing Front Piece Center Line area means a stronger joint. The lock miter joint is particularly suited to veneer plywood construction (see Figure 2: Setting the bit height. Figure 1). 3. Set the router fence so that a small flat will be Blind Lock Miter Joint left when the front piece is cut (see Figure 3). Ba 1 Final fence positioning is done after the height is ck 1 /2 diameter bit e (16J75.08/18J75.08) perfected. The size of the flat is not critical, but d 3/8 to 1/2 thick stock. i