【2017年整理】shish-kebab的形成.ppt

Manipulation of Shish-Kebab Structure during Injection Molding of Polyolefin Blends/Composites Qiang Fu Nanohybrid shish-kebabs formation from nylon6,6/MWNT glycerin solution from CY Li et al. Adv. Mater. 2005; 17: 1198. Polymer 2007; 48: 3452. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. * 四川大学 Sichuan University? * Department of Polymer Science and Materials, State Key Laboratory of Polymer Materials Engineering, Sichuan University Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 现代材料科学 材料的组成、结构和性能关系的研究 材料的组成、制备、结构、加工和性能的研究强调制备和加工的作用 高分子材料的最终结构和性能比其他材料更强烈依赖于制备和加工过程 不同加工 柔软薄膜 模量为0.5-2GPa中空容器 模量为200GPa，比强度为钢7倍的高模量纤维 聚乙烯 加工与形态控制：高分子材料高性能化的重要途径 加工与形态控制在高分子材料科学的重要性 discussion Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 经典理论中的球晶生长过程 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Strobl提出的晶体生长模型 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Schematic model of shish-kebab microstructure in polymer. from Processing of Polymers, edited by Meijer, 1997;18:189. Copyright (1997) VCH, New York Shish-Kebab : The main feature under shear or flow from T. Kanaya et al. Macromolecules 2007; 40: 3650 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. In-situ monitoring the formation of shish-kebab structure in PE melt after cessation of shear by time-resolved SAXS. Schematic representation of shear-induced precursor structure at different stages. from R.H. Sonami et al. Macromolecules 2002; 35: 9096 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. SEM micrographs of shish-kebab precise structures