基于DInSAR监测的动态地表移动变形数值模拟.pdfVIP

Trans. Nonferrous Met. Soc. China 24(2014) 1248−1254 Numerical simulation of dynamic surface deformation based on DInSAR monitoring 1,2 1 2 1 2 2 Yue-guan YAN , Hua-yang DAI , Lin-lin GE , Jun-ting GUO , Alex Hay-Man NG , Xiao-jing LI 1. College of Geoscience and Surveying Engineering, China University of Mining and Technology, Beijing 100083, China; 2. Geoscience and Earth Observing Systems Group, School of Civil Environmental Engineering, University of New South Wales, Sydney 2052, Australia Received 10 July 2013; accepted 24 December 2013 Abstract: Differential interferometric synthetic aperture radar (DInSAR) technology is a new method to monitor the dynamic surface subsidence. It can monitor the large scope of dynamic deformation process of surface subsidence basin and better reflect the surface subsidence form in different stages. But under the influence of factors such as noise and other factors, the tilt and horizontal deformation curves regularity calculated by DInSAR data are poorer and the actual deviation is larger. The tilt and horizontal deformations are the important indices for the safety of surface objects protection. Numerical simulation method was used to study the dynamic deformation of LW32 of West Cliff colliery in Australia based on the DInSAR monitoring data. The result indicates that the subsidence curves of two methods fit well and the correlation coefficient is more than 95%. The other deformations calculated by nume