房地产培训：房地产营销人员销售心理学提升训练营安致丞中房商学院.doc

《房地产营销人员销售心理学提升训练营》 安致丞承诺：专注房地产行业、帮助房地产企业打造团队提升绩效。 一、【课程收益】 1、6、掌握工具，以达到提升工作效率和工作。 、【培训方式】 互动演练，学员100%参与实操训练；理论讲授40％、实操训练35％、案例讨论15%、经验分享与现场答疑10％、【培训要求】 场地面积尽量大一些（以方便学员现场演练），2、音响、话筒、投影仪、、准备一份学员名单4、要求人人参与现场实操训练、【培训对象】 房地产销售员、客服、经理、总监 、管理人员等。 、【培训时间】 实战课时2天12小时 ，标准课时1天6小时、【】 先后与全国多个省市讲授培训课程，培训学员超过万人，课程满意度在97%以上。 秉承“做人才训练专家，为企业培养人才”的专业精神，安致丞老师在房地产销售业绩提升、团队建设、营销改善、服务提升培训中本着“造物先育人”的理念，将人才培育、人员激励、团队建设、业绩提升、客户服务等改善技术有效结合，帮助多家企业实施改善并获得显著成效。 position for future reference. Installation using special lifting pole rotor 6.4.4.6 rotor lift, box spirit level to check the rotor axis neck of Yang, on both sides of the rotor should be lateral raises and numerical deviation of ≤ 0.10MM, qualified before the official lifting. Hoisting of the rotor dynamic and static clearance should be measured, rotors check clearance to prevent rotor colliding. 6.4.4.7 stationary blade carrier, diaphragm and sealing upper cylinder on the inside and install the mounting bolts, bolts and bolt holes in the surface should be coated with molybdenum disulfide. Follow the manufacturers stamp marked to install good sealing ring and spring. Check the sealing ring and spring plate, shall conform to the technical requirements manufacturers drawings. Bolt: ... Measurement with measurement tools, special tools, temporary connection bolts and connection tool equipped and in good condition. The rotor shaft to have fixed, such as thrust, bearing plates fixed installation, in case of wear of the rotor is too large. The coupling gasket check measurements: measured data processing according to gasket, clean the coupling gasket surface clean and Burr-free, check the coupling gasket thickness data, shim thickness deviation of ≤ 0.02mm, parallel degree deviation of ≤ 0.02mm. Coupling temporary bolts ready: preparing 4-8 bolt diameter coupling bolt hole diameter 0.5-1.0mm. 6.4.5.2 shaft coupling 6.4.5.2.1 General requirements in both the relative position of the flange accord