充电电池基本测试.pdfVIP

Your GloCal Service Partner. Rechargeable battery basic test requirement simple introduction （For QC reference) 充电电池的基本测试要求简介(QC参考） SZO-QA Tonna Guan Sep 15, 2009 Your GloCal Service Partner.  Contents: -EN61951-1:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes-Portable sealed rechargeable single cells Part1:Nickel-Cadmium 含碱性或其他非酸性电解质的二次电池和蓄电池.便携密封可再充电单电池 第1部分_镍镉电池. -EN61960:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes- Secondary lithium cells and batteries for portable applications 装有碱性或其它非酸性电解液的蓄电池和电池组用于便携式的充电锂电池和电池组 -ANSI C18.2M PART1: American national standard for portable rechargeable cells and batteries-General specifications 第一部分：便携式充电电池的美国标准-一般要求 -Battery Dimension 电池尺寸 Your GloCal Service Partner.  EN61951-1:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes-Portable sealed rechargeable single cells Part1:Nickel-Cadmium 含碱性或其他非酸性电解质的二次电池和蓄电池.便携密封可再充电单电 池 第1部分_镍镉电池. 5.3 Marking 标识 7.1 Charging procedure for test purposes 充电的测试流程 7.2.1 Discharge performance at 20℃ 20℃环境温度下的放电性能 Your GloCal Service Partner. 5.3 Marking 标识 Each jacketed cell supplied without connections shall carry durable markings giving the following minimum information: 每个单独电池要提供至少包括以下信息的耐久标识： -Sealed, rechargeable nickel-cadmium or Ni-Cd 密封的，可充电的镍镉 -Cell designation 电池类型 -Rated capacity 额定容量 -Nominal voltage 标称电压 -Recommended charge rate and time or permanent charge current for “T” cells 对于T 电池（