- 16
- 0
- 约3.38万字
- 约 10页
- 2017-05-11 发布于河南
- 举报
规整填料结构对液相分布影响的计算流体力学
学兔兔
化 工 进 展
20 1 5年第34卷第1 1期 CHEMICAL INDUSTRY AND ENGINEERING PROGRESS ·3869·
规整填料结构对液相分布影响的计算流体力学
谭丽媛 ,袁希钢 ,KALBASSIMohammadAli
( 化学工程联合国家重点实验室(天津大学),天津 300072; Air Products Public Limited Company,Walton on
Thames,UK)
摘要:提出了一种新型的拟循环边界条件,并采用计算流体力学(computational fluid dynamics,CFD)中VOF
(volume of fluid)多相流模型对液相在两相邻规整填料特征单元上的分布进行三维仿真模拟,数值模拟结果与
已有经验公式具有较好的吻合性。从介尺度的角度出发,系统地研究了规整填料的宏观结构和微观结构对液相
在规整填料片上分布的影响。结果表明:规整填料的波纹倾角和表面微观结构对液相特别是低表面张力物系在
规整填料内的流动形态有很大的影响,而比表面积对液相在规整填料内的流型几乎无影响。相同液相流率下,
液相在高比表面积、填料表面有波纹的Y型规整填料片上的分布较好,具有较好的流体力学性能。
关键词:计算流体力学;多相流;介尺度;规整填料结构;液相分布;流动形态
中图分类号:TQ 028.8 文献标志码:A 文章编号:1000—6613(2015)11—3869—10
D0I:10.16085~.issn.1000—66l3.20l5.11.008
Effect of structured packing’S structure on liquid distribution by
computational fluid dynamics
TANLiyuan ,YUANXigang ,KALBASSIMohammadAli2
( State Key Laboratory ofChemical Engineering,Tianjin University,Tianjin 300072,China: Air Products Public
Limited Company,Walton on Thames,UK)
Abstract:A volume of fluid multiphase.flow mode1 for two adjacent sheets of structured packing was
used to investigate the effect of structure of structured packing on liquid distribution in meso—scale.The
three—dimensional computational fluid dynamics(CFD)simulation visualized liquid distribution.and
the results showed good agreement with the existing correlation for effective area.Numerica1
simulation results showed that both angle of inclined corrugation to the horizontal and micro—structure
of surface played significant roles in liquid d
原创力文档

文档评论(0)