punnet用户指南.docx

punnet的用户指南1. About Punnet1关于punnet2. Installation2安装2.1. Compatibility2.1兼容性Punnet was installed and runs successfully on Linux and Unix platforms. The software is written entirely in Matlab as M-files and runs within Matlab, thus does not require to be installed. However, to be able to run Punnet successfully all the Matlab’s Signal Processing Toolboxes must be installed. (To check which toolboxes are present type ver in Matlab’s command window.)punnet安装并成功运行在Linux和UNIX平台。该软件是完全在MATLAB m文件编写并在MATLAB中运行的，因此不需要安装。然而，为能够成功运行punnet， MATLAB的所有信号处理工具箱必须安装。（在MATLAB的命令窗口检查工具箱的类型版本）Punnet uses Stanford University software SNAPHU (Statistical-cost, Network-flow Algorithm for Phase Unwrapping), which can be freely downloaded from: punnet使用斯坦福大学软件snaphu（统计成本，相位展开的网络流算法），可按下址自由下载：/sar_group/snaphu/.安装说明可以在软件的文档中找到的。2.2. Contents:2.2内容：Punnet comes with two main directories: ‘matlab’ and ‘raspberry’. The ‘matlab’ folder contains the generic script files. ‘Raspberry’ is Punnet’s main directory and contains all the subroutines related to InSAR and SBAS processing.punnet有两个主要目录：“MATLAB”和“raspberry”。“Matlab”文件夹包含通用的脚本文件。“raspberry”是punnet的主目录，包含所有与InSAR和SBAS处理相关的的子程序。3 预操作准备3.1Matlab请输入您要翻译的文字内容或网页地址3.2. Parameter files3.2参数文件3.2.1. Before one can start processing with Punnet some important parameters, regarding the datasets, DEMs and scene subset (area of interest), must be specified. Supplied are three text files: ‘sarfiles.txt’, ‘subparams.txt’ and ‘demparams.txt’ which can be used as templates. 3.2.1在用punnet开始处理数据前必须先指定数据集的一些重要参数，如DEM和场景的子集（兴趣区）。提供三个文本文件：“sarfiles.txt ， subparams.txt”和“demparams.txt”可以作为模板。‘sarfiles.txt’: This file contains the directory paths for radar image datasets. These paths should be changed to users own directory. Two radar data files are essential for processing with Punnet: the image file and leader file. For ERS data these are ‘DAT_01.001’ and ‘LEA_01.001’, respectively. These should listed in the text file as follows:sarfiles.txt”：这个文件包含雷达图像数据集的目录路径