基于电流转移法的直流断路器灭弧方案仿真.pdfVIP

ISSNI672- 430S 实验室科 学 第 19 卷第4 期 2016 年8 月 CNI2- 13S2/N LABORATORY SCIENCE Vol. 19 No.4 Aug.2016 基于电流转移法的直流断路器灭弧方案仿真 孟庆钧1 ，赵羽佳2 ，段志强3 ，王振刚I (1.天津理工大学中环信息学院，天津 3∞380; 2. 天津市地下铁道运营有限公司，天津 3肌)()51; 3. 中铁隧道勘测设计院有限公司，天津 3∞133) 摘 要:灭弧问题是直流断路器需要解决的难题之一。 在对比分析了四种典型的直流断路器灭弧方案的基础 上，得出了电流转移法具有其他方法无法比拟的优点结论，并结合案例对采用电流转移法的直流断路器 系统进行等效理论分析，基于Maùab 建立仿真模型。 仿真结果表明，基于电流转移法的直流断路德能够产生 电流入工过零点， 且具有较好的灭弧效果。 关键词:电流转移法;直流断路器;灭弧方案;仿真 中图分类号:TM561 文献标iR码:A doi: lO.3969/j .issn. 1672- 4305.2016.04.013 Simulation of arc extinction program based on current transfer method for the DC circuit breaker J 2 MENG Qing-bo , ZHAO Yu-jia , DUAN Zhi-qian矿， WANG Zhen-gangl ( 1. Zhonghuan Information College Tianjin Univer百ity of Technology , Tianjin 3∞380， China; 2. Tian- jin Metro Operation Co. ,Ltd. , Tianjin 3α)()51 ， China; 3. China Railway Tunnel Survey Design In- stitute Co. , Ltd. , Tianjin 3∞1 33 ， China) Abstract: It is a question that how to solve arc extinction on the DC circuit breaker. On the basis of comp缸ative analysis four typical DC circuit breaker arc extinction program , it has been obtained 由at current transfer method h臼 an unmatched advantage over other methods , and cornbined with project , equivalent theory analysis is done for the DC circuit breaker with current transfer method used , simula- tion model is set up based on Matlab. The simulation results show that a cuπent artificial zero crossing is generated when the DC circuit breaker wi由 cuηent 住在nsfer method used is used , and has a good 缸℃ extinction effect. Key words: current transfer method; DC circuit breaker; 缸c extinction progra