铅铋冷却快堆子通道热工水力初步数值分析.pdfVIP

第47卷第1 期 原子能科学技术 Vo l. 47 ,No. 1 2013年1 月 Atomíc Energy Scíence and Technology Jan. 2013 铅铅冷却快堆子通道热工水力初步数值分析 王 俊，田文喜，回永红，苏光辉，秋穗正 (西安交通大学能源与动力工程学院，陕西西安 710049) 摘要:为探索铅钻冷却快堆子通道的热工水力特性，自主研发了 SACOS-PB 子通道程序。本工作以矩 形通道 9 根棒束组件为例，使用 SACOS-PB 程序对铅俗冷却快堆子通道的温度场进行了模拟分析，并用 CFX 软件进行验证。结果显示，SACOS-PB 程序计算结果与文献值比较符合，与 CFX 软件汁算结果符 合度也较高。使用 SACOS-PB 程序分析比较了 3 种组件结构，表明在铅锁冷却快堆中更适宜使用六边 形通道，为进一步对铅锵冷却快堆子通道进行热工水力特性分析奠定了基础。 关键词:SACOS-PB 程序;CFX 软件;六边形燃料组件:子通道 文章编号:1000-6931(2013)01-0038-05 中图分类号:TL333 文献标志码:A doi:10. 7538/yzk. 2013.47.01. 0038 Thermal-Hydraulic Primary Numerical Analysis for Pb-Bi Fast Reactor Sub-channel WANG Jun , TIAN Wen-xí , TIAN Yong-hong , SU Guang-huí , QIU Suí-zheng (School 0/ Energy and Power Engineering , Xi an ] iaotong University , Xi an 710049 , China) Abstracì: To explore the thermal-hydraulícs characters of Pb-Bi fast reactor sub- channel , the sub-channel program SACOS-PB was developed independently. As an example , the rectangle nine fuel rods construction was set , and its coolant temperature along the axiallength was calculated. The results show that calculating resu !ts are good agreement with the reference results and the CFX calculating results. The three differ- ent constructions of the sub-channels were analyzed using SACOS-PB program , and the results show that the hexagon construction is the most suítable construction. The current rcscarch r巳su!ts establish a foundation for the further study. Key words: SACOS-PB program; CFX software; hexagon fuel assembly; sub-channel 铅铅冷却快堆的结构设计相比其他快堆得 6 种第 4 代先进核能系统中的一种，铅铅冷却快 到极大的简